الإنجليزية
الإسبانية
العربية
الفرنسية
البرتغالية
الألمانية
التايلاندية
البولندية
Türkçe
الروسية
ZPW-4-4 Rotary Block Press
Purpose-built compression for distinctive tablet formats, formulations and application requirements.
The ZPW-4-4 Rotary Block Press is an individual model in تيانفنغ Machinery’s Rotary Block Press range. It is intended for special-purpose tablet forming, processing special formulations or shaped products that need a dedicated compression configuration. Its role is to deliver controlled product formation while addressing the geometry, handling or process needs of the application. الطراز ZPW-4-4 is presented as a separate product so buyers can compare the exact model listed in the product manual rather than selecting from a combined family page. Typical projects include effervescent and specialty tablets, two-color or shaped products, compressed blocks and non-standard forms, research and process development, and custom solid-dose projects. تواصل مع تيانفنغ for a model-specific configuration and quotation based on your material, target product and required output.
Built Around the Requirements of ZPW-4-4
The ZPW-4-4 Rotary Block Press is an individual model in تيانفنغ Machinery’s Rotary Block Press range. It is intended for special-purpose tablet forming, processing special formulations or shaped products that need a dedicated compression configuration. Its role is to deliver controlled product formation while addressing the geometry, handling or process needs of the application. الطراز ZPW-4-4 is presented as a separate product so buyers can compare the exact model listed in the product manual rather than selecting from a combined family page. Typical projects include effervescent and specialty tablets, two-color or shaped products, compressed blocks and non-standard forms, research and process development, and custom solid-dose projects.
Good equipment selection begins with the product rather than the machine alone. For the ZPW-4-4, تيانفنغ first considers the physical behavior of the incoming material, the required product characteristics, the production schedule and the way operators will clean and maintain the equipment. These factors influence the most suitable working configuration, material-contact specification, controls and line connections. The objective is not simply to supply a machine that can run, but to establish a practical process that can be repeated from batch to batch.
The published product image shows the external arrangement of the ZPW-4-4, while the technical table reproduced from the تيانفنغ product manual below provides the original family and model data. Where a table contains several models, buyers should refer to the ZPW-4-4 column. Because final performance depends on the processed material and chosen options, the manual data should be used as a selection reference and confirmed again in the technical proposal.
Why Buyers Choose the ZPW-4-4
دور واضح في العملية
The ZPW-4-4 is selected around a defined production task instead of a vague equipment label. Its configuration should be matched to the incoming material, required finished product and the practical rhythm of the plant. This makes specification discussions more useful: the buyer can describe the process challenge, and تيانفنغ can confirm how this individual model should be equipped for the application.
Application-focused design
A key reason to consider the ZPW-4-4 is application-focused design. The mechanical arrangement is intended to keep the main process direct and understandable, helping operators follow a repeatable sequence from material preparation through product discharge. A clear workflow also supports more predictable scheduling, easier operator training and faster identification of the settings that matter most for product quality.
Special format capability
The machine is designed around special format capability. Stable material movement and a controlled process zone help reduce unnecessary variation between batches. Final performance still depends on the formulation and selected settings, so تيانفنغ reviews the material characteristics, product target and expected output before confirming the recommended configuration.
Controlled product handling
For daily production, controlled product handling is as important as nominal machine capacity. The equipment layout supports practical observation, routine cleaning and planned maintenance. Product-contact materials, surface treatment, guards and access arrangements can be confirmed for the project so that the delivered machine fits the buyer's internal hygiene and operating procedures.
Configurable tooling solution
The ZPW-4-4 offers configurable tooling solution for new lines, replacement projects and capacity upgrades. Voltage, control language, feeding or discharge connection, dust-management interface and other project details can be discussed before manufacture. This project-based approach avoids treating one standard specification as suitable for every material and every factory.
دعم من الاختيار حتى بدء التشغيل
تيانفنغ Machinery can review samples, target product data and line-layout information before quotation. The resulting proposal can identify the appropriate model, key options, utilities and connection points. After delivery, clear operating and maintenance documentation helps the production team build a dependable routine around the ZPW-4-4 and keep the equipment available for planned production.
ZPW-4-4 Technical Parameters
The table below is taken directly from the supplied تيانفنغ product manual. It preserves the model names, units and published values for comparison. For this page, use the ZPW-4-4 column or row. If your material, voltage, tooling, controls or installation conditions differ from the standard arrangement, request a confirmed technical sheet with the quotation.
| المعامل | ZPW-4-4 |
|---|---|
| Max pressure(kN) | 160-220 |
| Max diameter(mm) | 40 x 80 |
| Max filling depth(mm) | 40 |
| Max thickness(mm) | 8-18 |
| Max working diameter(mm) | 750 |
| سرعة دوران البرج (r/min) | 8 |
| الطاقة الإنتاجية (قطعة/ساعة) | 7680 |
| قدرة المحرك (kW) | 11 |
| Turntable running motor power(kW) | 3 |
| Feeding motor power(kW) | 0.12 |
| Stirring motor power(kW) | 15 |
| Qverall size(mm) | 1900 x 1260 x 1260 |
| وزن الآلة (كجم) | 2600 |
بيانات فنية منقولة من دليل منتج تيانفنغ Machinery المرفق. المواصفات النهائية تخضع لتكوين الطلب المؤكد.
Where the ZPW-4-4 Fits
The ZPW-4-4 can be considered for effervescent and specialty tablets, two-color or shaped products and compressed blocks and non-standard forms. It can also support research and process development and custom solid-dose projects when the material and target product fall within the confirmed operating range. The same model may therefore serve different industries, but the correct result depends on matching the machine to the process rather than relying on the model name alone.
For a new production line, the equipment should be reviewed together with upstream preparation and downstream handling. Feed method, discharge height, dust control, operator access and cleaning space can affect daily usability. For a replacement project, تيانفنغ can compare the existing line interface and room layout so the ZPW-4-4 is easier to position and connect. For capacity expansion, the discussion should use realistic product data and planned operating hours instead of theoretical output alone.
تكون تجارب المنتج أو التواصل التقني المفصل ذات قيمة خاصة عندما تكون المادة متماسكة أو هشة أو حساسة للحرارة أو كاشطة أو صعبة المعالجة بأي شكل آخر. ويتيح تبادل عينات تمثيلية ومعايير قبول واضحة أن يركز العرض على المتغيرات التي تهم المشتري، بما في ذلك جودة المنتج والعائد القابل للاسترداد ووقت التنظيف والتشغيل الآمن.
- الأقراص الفوارة والمتخصصة
- منتجات ثنائية اللون أو مشكّلة
- الكتل المضغوطة والأشكال غير القياسية
- البحث وتطوير العمليات
- Custom Solid-Dose المشاريع
How to Specify the Right Rotary Block Press
Before ordering the ZPW-4-4, provide تيانفنغ with the material name, composition or general formulation, bulk density, moisture condition and any relevant flow, heat or dust behavior. Describe the target product and the quality indicators that matter in production. These details allow the engineering team to review whether the standard ZPW-4-4 arrangement is appropriate or whether another model or option would provide a better technical fit.
ينبغي مناقشة الإنتاجية كهدف إنتاجي عملي. معامل الكتيب مفيد للمقارنة الأولية، لكن النتائج الفعلية تعتمد على المادة وأبعاد المنتج والإعدادات المختارة واستقرار التغذية وممارسة التشغيل. كما ينبغي تأكيد المرافق في وقت مبكر، بما في ذلك الإمداد الكهربائي والهواء المضغوط والتفريغ والبخار والماء الساخن أو العادم حيثما كان ذلك مناسبًا لهذا النوع من المعدات.
أخيرًا، تأكد من بيئة التركيب. يمكن أن تؤثر أبعاد الأبواب والمصاعد، وتحمل الأرضية، وارتفاع السقف، ومساحة الخدمة، ومسار التنظيف، وموضع المعدات المتصلة في تخطيط التصميم والتسليم. تساعد مراجعة الرسومات قبل التصنيع على منع التعديلات التي يمكن تجنبها في الموقع وتمنح كلا الفريقين مرجعًا واضحًا للمشروع المعتمد.
- Finished-Product Geometry
- Formulation Behavior During Compression
- Single, Multi-Layer Or Color Requirements
- Environmental التحكم Needs
- Tooling, Containment And Cleaning Strategy
التكامل والتشغيل والصيانة
The ZPW-4-4 should be integrated into a workflow that gives operators enough space to load, observe, discharge and clean the equipment safely. Material staging and containers should be planned so that the machine is not left waiting for the previous process. Downstream receiving equipment should accept the product without unnecessary drops, hold-up points or exposure. If several machines are linked, control signals and emergency-stop responsibilities should be defined as part of the line design.
تتضمن خطة البدء العملية تدريب المشغلين، وطريقة تنظيف متفقًا عليها، وجدولًا للصيانة الوقائية. وينبغي تحديد قطع التآكل والمواد الاستهلاكية قبل بدء الإنتاج الروتيني. ويمكن للمشغلين بعد ذلك تسجيل الإعدادات المرتبطة بمنتج مقبول، بينما يتتبع فريق الصيانة فترات الفحص وسجل الاستبدال. ويساعد هذا النهج المنضبط في الحفاظ على قابلية التكرار ويدعم استكشاف الأخطاء وإصلاحها بشكل أسرع عند تغير المواد أو ظروف التشغيل.
يمكن لـ تيانفنغ تنسيق تأكيد الطراز وتفاصيل التصنيع وفحوصات ما قبل الشحن والمستندات الخاصة بالمشروع. عادةً ما يتلقى المشترون الذين يشاركون معلومات العملية الكاملة في وقت مبكر عرضًا أكثر دقة ويتجنبون التغييرات المتأخرة في الأدوات أو المرافق أو التوصيلات.
طلب عرض سعر for the ZPW-4-4
أرسل مادتك والمنتج المستهدف والسعة المطلوبة والجهد الكهربائي والوجهة. ستراجع تيانفنغ التطبيق وتؤكد التكوين الموصى به.
صور المنتج ومعلمات الدليل مخصصة لتحديد الطراز والاختيار الأولي. تخضع الأبعاد النهائية والإنتاج والتكوين للاتفاقية الفنية المعتمدة.